Selective Soldering

Selective Soldering
A.C.E. Selective Soldering Systems

The A.C.E. Selective soldering systems have been developed to simplify the soldering process of attaching through hole electronic components onto printed circuit boards that also have surface mount components attached to the under side.

The compact solder pot has interchangeable drop in nozzles, is mounted on a precision X/Y axis control plus Z height movement with an over the top laser positioning system for easy alignment and pin point positioning of the solder joint. These compact systems can solder down to 1.5mm spacing between components. Available as table top, stand alone or inline. A.C.E Selective Soldering Systems ~ KISS (Keep It Simple Soldering).

Systems

Kiss KFPHIL
In-Line Selective Fluxing
KFPHIL

The KFPHIL in-line fluxer/pre-heat unit is an intelligent dual purpose system that significantly reduces the process time by concurrently applying flux to the specific components to be soldered then pre-heating the board in preparation for soldering.

Kiss-100 Selective Soldering
Table-Top Selective Soldering
KISS-100

The KISS-100 is a full featured compact table top unit and by far the lowest cost automated selective soldering machine available.

Kiss101 Automated Soldering
Automated Selective Soldering
KISS-101

The KISS-101 is a low cost automated selective soldering machine featuring a lead alloy solder pot, spray fluxer and a programming camera, all in an enclosed superstructure.

KISS 101IL In-Line Selective Soldering
In-Line Selective Soldering
KISS-101IL

The KISS-101IL is the automated in-line version of the manual loaded KISS-101 machine. The KISS-101IL performs the soldering of ‘through hole” components to PCBs in a “lights out” in-line process.

KISS 102 High Speed Selective Soldering
High Speed Selective Soldering
KISS-102

The KISS-102 is an automated, simple to use low cost selective soldering machine using the proven ‘traveling mini–solder wave”. It is used to flux and solder through hole components on SMT boards within close proximity of adjacent components.

KISS-102IL In-Line Selective Soldering
In-Line Selective Soldering
KISS-102IL

The KISS-102IL performs the soldering of ‘through hole” components to PCBs in a “lights out” in-line process while  maintaining the PCB stationary which prevents components from toppling over causing “unset” inter-metallic fillets.

High Speed Selective Soldering
KISS-103

The KISS-103 is a stretched version of the KISS-102 machine, intended for larger PCBs. The KISS-103  is used to flux and solder through hole components on SMT boards within close proximity of adjacent components.

KISS-103IL
In-Line Selective Soldering
KISS-103IL

The KISS-103IL performs the soldering of ‘through hole” components to PCBs in a “lights out” in-line process while  maintaining the PCB stationary which prevents components from toppling over causing “unset” inter-metallic fillets.

KISS-105IL Large In-Line Soldering
Large In-Line Soldering
KISS-105IL

The KISS-105IL is a larger version of our KISS-103IL designed to handle the board size and weight of backplanes and other oversized product. The KISS-105IL overcomes the labor issues and process difficulties of hand soldering components into thick, backplanes.